Fits CHEVY CAMARO AND Z28 AND SS 1993,1994,1995,1996,1997,1998,1999 2000,2001,2002 It will not fit 97-02 SS model
The picture above simulates what
your third brake light will look like. This item is not made by or endorsed by
GM.
You are bidding on one custom(whatever
you want it to say up to 10 letters) Third Brake light cover decal
made to fit
This
item is made out of glossy black decal/sticker/sign vinyl film. It will
last 5-7 years. Looks great in day light and at night when you press
your brakes the message will glow. You get to choice the wording up to 10
characters including spaces. When
you checkout please include what you want on the cover in the NOTE TO
SELLER BOX!!! The font I
use for this item is ARIAL BLACK. Easy to install
just read the directions below.
Work
area: Please install the decal cover in a well lit garage or
outside when no
wind is present. The air temp must be 40deg – 90deg if the temp is
below 40deg just press on your brakes for 5 mins this will heat the
lens. Also, keep the decal at room temp before the install.
Prep: PLEASE
clean your 3rd brake light lens before you install
the cover!!! After
you have let the lens dry you are ready to install the cover.
You will
see that the cover has 3 parts to it. The top layer is the
clear
transfer tape. The seconded layer is the vinyl decal and the 3rd layer
is the backing paper.
Install: Firmly
rub the top of the decal with your thumb. Then, remove the white
backing
paper SLOWLY. If the decal is sticking to the backing paper lay it back
down and try it again. After you have the decal and transfer tape
removed from the backing paper you are ready to stick the decal onto
the 3rd brake light lens. You will need to line up the decal with the
3rd brake light lens. After you have it lined up now stick it to the
lens. The decal is about 1/16 inch larger than the 3rd brake
light lens
so there is little room for error. After you have it stuck to the lens
RUB FIRMLY ON THE COVER! Now you are ready to remove the clear transfer
tape. Take your finger nail and grab the edge of the transfer tape and
slowly pull it off. If any part of the decal starts to come
up with
the transfer tape lay it back down and rub on it and try again. Now
that you have removed the transfer tape you are done! If you have any
bubble take a pin and pop them. If you have extra vinyl hanging over
the edge you can tuck it around the lens or trim it. The vinyl
cover
will last 5-7 years. IF YOU HAVE ANY PROBLEMS PLEASE EMAIL
BEFORE
LEAVING FEEDBACK!!!
Payment TermsPlease include that you want on your cover with payment. Click on “NOTE TO SELLER” button during the check out. If you do not it will hold up the shipping of your item.Shipping TermsALL ITEMS ARE SHIPPED VIA USPS FIRST CLASS MAIL AND SHOULD ARRIVE IN 3-7 BUSINESS DAYS INSIDE THE USA AND 5-10 BUSINESS DAYS OUTSIDE THE USA
inkfrog terapeak